EASILY REPLACE YOUR ZONEPRO® BANNER
BANNER REPLACEMENT GUIDE
Watch the video or read the written instructions below to learn how to replace the Banner in your ZonePro® Canister.
TOOLS NEEDED:
PHILLIPS HEAD SCREWDRIVER
STEP ONE
Start by laying the ZonePro® and new fabric cartridge on a table or other flat surface.
STEP TWO
Unscrew the bottom cap with the "23 winds" sticker.
This side is spring-loaded, so be careful not to unwind the cap too quickly. Leave the screws inside the cap and put to the side.
STEP three
Remove the old fabric cartridge, making sure to keep upper plastic spool to use with the new fabric.
STEP FOUR
Insert the spring assembly and plastic spool into the new fabric cartridge.
STEP FIVE
Insert the new fabric into the ZonePro® case. Make sure the fabric is facing the same way as the spindle you removed.
STEP SIX
Rotate the cap 23 winds in the direction of the arrow. Push the cap back into place and tighten the screws. You’re all done!
Still need help? Call us 989-966-3776 or email us at support@zonepro.com
NEED HELP WITH A CUSTOM ORDER?
Do you need help with a custom order or have a specific request that requires direct assistance? If so, please don't hesitate to get in touch. We are happy to assist you.